Structure Of Centrifugal Barrel Finishing Machine
Centrifugal Barrel Finishing Machine At work, the polishing container of the abrasive is four hexagonal cylinders of the same size. The weight and quantity of the four rollers are the same and symmetrical when working. If the weights of the four rollers are inconsistent, Affect the normal operation of the machine, and should not place three rollers for work. Otherwise the machine will vibrate and affect the use of the machine while the machine is moving. If the polishing abrasive material in the four rollers is inconsistent with the weight of the workpiece, it will cause great disadvantage to the operation of the machine.
Therefore, the weight of the materials contained in the four rollers should be equivalent during the work operation. Sometimes when the part is processed less, it is better to use two of the rollers symmetrically placed without causing damage to the machine's transmission system. However, you cannot use three rollers. When using two rollers, it should be noted that the two rollers should be placed symmetrically in the rolling body, and the weight of the polishing objects contained in the two rollers should be equivalent to prevent the machine from vibrating and causing malfunction due to centrifugal imbalance.
Also note that Centrifugal Barrel Finishing Machine
The drum drum operation method is similar. When the product is polished and polished, the contents of the drum should not be too full. When the volume ratio of the drum is 40~50%, the grinding and polishing effect on the workpiece is the best.
information about centrifugal barrel finishing machine : https://www.zhongyun-machine.com/product/
|Related Link: Click here to visit item owner's website (0 hit)|
|Target Prov.: New Brunswick|
Target City : Huzhou
Last Update : Jul 16, 2019 2:25 AM
Number of Views: 1
|Item Owner : machineunique|
Contact Phone: (None)
|Friendly reminder: Click here to read some tips.|