The advantages and disadvantages of triple eccentric butterfly valve
The advantages of triple eccentric butterfly valve
Three eccentric butterfly valve also belongs to the metal hard seal butterfly valve, which is characterized by high temperature, corrosion resistant alloy material surfacing in the valve seat sealing surface layer, the multi-layer soft stack seal ring fixed on the butterfly board, such The process makes the three-offset butterfly valve more resistant to high temperature and high pressure than traditional butterfly valve products and is more resistant to corrosion. At the same time, because of the unique design of the three eccentricity, the valve is very easy to operate. When the valve is closed, the moment of the transmission mechanism increases to provide a compensation seal, greatly improving the three eccentricity. Butterfly valve sealing performance, while extending the life of the butterfly valve. What is the three eccentricity of three eccentricities?
The first eccentric: The valve shaft is located behind the valve plate shaft so that the seal can completely and tightly contact the entire valve seat.
The second eccentricity: The centerline of the valve shaft deviates from the centerline of the pipe and the valve, which is protected from the opening and closing of the valve.
3rd eccentricity: The seat cone shaft deviates from the centerline of the valve shaft. This
eliminates friction during closing and opening, and achieves a uniform compression seal around the entire seat.
Disadvantages of triple eccentric butterfly valve
The perfect thing is more or less flawed and imperfect. The three-offset butterfly is no
exception. Its disadvantages are the following two points:
1, the special process of the three eccentric butterfly valve, the structure of the butterfly
plate will be relatively thick, so if the three eccentric structure of the butterfly valve on
the small diameter pipeline, in the open state, the resistance of the butterfly plate for the flow medium in the pipeline will be very large, flow Large resistance, so in general the three eccentric butterfly valve is not suitable for DN200 below the small diameter pipeline.
2. In the normally open pipeline, the valve seat sealing surface of the three-offset butterfly valve and the level seal ring on the butterfly plate are subject to frontal flushing. A long
time will affect the sealing performance of the valve.
|Related Link: Click here to visit item owner's website (1 hit)|
|Target Prov.: All Provinces|
Target City : All Cities
Last Update : Jun 29, 2018
Number of Views: 119
|Item Owner : Bundor|
Contact Email: (None)
Contact Phone: (None)
|Friendly reminder: Click here to read some tips.|