Free Classifieds at - View Item Content by ID 2459359

CANetAds > Automobiles & Vehicles > Bicycles > Item ID 2459359

Item ID 2459359 in Category: Automobiles & Vehicles - Bicycles

Cannot view this item. It could be pending, expired or deleted.
Below item is randomly selected from the same category and may have similar content.

China Polishing Machine'S Precautions For Use

The China Polishing Machine consists of basic components such as a base, a throwing disc, a polished fabric, and a polishing cover. The key to the operation of the polishing machine is to try to obtain a maximum polishing rate so that the damaged layer produced by the polishing can be removed as quickly as possible. At the same time, the polishing damage layer will not affect the one tissue that is ultimately observed. The use of coarser abrasives ensures a higher polishing rate to remove the polished damage layer, and the polishing damage layer is also deeper. The latter uses a thinner material and the polished damage layer will be shallower.

For the above problem, the polishing can be carried out in two stages. The purpose of the rough polishing is to remove the polished damage layer. This stage should have a large polishing rate, which is a secondary consideration for the surface damage caused by rough polishing. However, it should be as small as possible, and the wire drawing machine is followed by fine polishing to remove a surface damage and then minimize its damage.

When the polisher is polished, the sample surface should be parallel to the polishing disk and uniformly pressed against the polishing disk. Care should be taken to prevent the sample from flying out or because the pressure is too high to create a new wear scar, while also allowing the sample to spin and move back and forth along the radius of the turntable. In order not to wear too fast, it is necessary to continuously add a fine powder suspension to maintain a certain humidity of the polishing fabric.

information about china polishing machine :

Related Link: Click here to visit item owner's website (0 hit)

Target Prov.: Newfoundland and Labrador
Target City : Huzhou
Last Update : Jun 14, 2019
Number of Views: 9
Item  Owner  : machineunique
Contact Email:
Contact Phone: (None)

Friendly reminder: Click here to read some tips.
CANetAds > Automobiles & Vehicles > Bicycles > Item ID 2459359
 © 2019
2019-06-15 (0.112 sec)